IMPULSE care bed

One care bed. Nine editions. Thousands of possibilities.

QUALITY
products show
ATTENTION to DETAIL

Andreas Tenzer

IMPULSE

With intuitive operation, a wide range of configuration options and well-thought-out functions, the bestseller from Malsch is suitable for adapting to almost all care application areas.

But that's not all: In terms of individuality, there are hardly any limits when it comes to the IMPULSE care bed. Choose from a variety of wood finishes to best suit your space concept. Customise IMPULSE to your requirements and evaluate the added value our low beds provide while reducing the need for restrictive measures – providing greater freedom and self-determination for patients and residents.

IMPULSE – complete flexibility and planning reliability for the care industry.

Wide range of functions for maximum safety and efficiency

IMPULSE – the multi-talented bed for inpatient care with a variety of functions to provide safe and comfortable care.

The intuitive hand controller ensures quick and safe motorised adjustment of the extensive care and comfort functions of the premium care bed.

IMPULSE editions 400 (LR) / 420 (LR) and 500 have a low position to reduce the risk of injury caused by falling out of bed. This function is gladly used as an alternative to restrictive measures for groups at risk of falling.

The vertically retractable side rail systems combined with the broad range of bed functions provide a high level of flexibility in the mobilisation, positioning and safeguarding of patients/residents, effectively helping to prevent falls.

An integrated bed extension makes it possible to extend the reclining surface of the comfort care bed by up to 220 cm without using tools, providing ample space even for larger people.

Numerous customisation options and comprehensive range of accessories and furniture offer free reign when designing your care room.

IMPULSE comfort care bed

Discover the IMPULSE care bed functions

Low position for fall prevention

The IMPULSE care bed features a low position for fall prevention. The low position is available for IMPULSE editions 400/400 LR, 420/420 LR and edition 500. Effective fall position is achieved at a reclining surface height from 15 cm in IMPULSE edition 500.

Extended fall prevention

The extended fall prevention function on the vertically retractable split side rails (VGS) provides tangible boundaries around the sleeping surface to prevent the bed occupant from unconsciously rolling out of bed. The handrail minimally but perceptibly raises the edge of the mattress. Occupants can climb over it easily at any time and so their freedom is not restricted.

Transfer position

IMPULSE low care beds have a transfer position that provides an intermediate height to move in and out of bed at sitting height. Combined with the mobilisation position of the side­rail­ options GS and VGS, occupants can get into and out of bed comfortably, safely and independently.

Comfort sitting position

The button mechanism on the hand controller moves the bed into a comfortable, upright sitting position for the occupant. The comfort sitting position has a positive effect on vital functions, facilitates orientation for residents/patients and allows them to communicate with each other.

Trendelenburg position

The Trendelenburg position can be a good measure to assist with stabilising occupants with circulatory problems. The motorised adjustment in the head-lowering device enables quick action in an emergency.

Figures showing edition 400

Low position for fall prevention

The IMPULSE care bed features a low position for fall prevention. Effective fall prevention is achieved when the reclining surface is at a height of just 25 cm or 26 cm (LR 100/125).

Extended fall prevention

The extended fall prevention function on the vertically retractable split side rails (VGS) provides tangible boundaries around the sleeping surface to prevent the bed occupant from unconsciously rolling out of bed. The handrail minimally but perceptibly raises the edge of the mattress. Occupants can climb over it easily at any time and so their freedom is not restricted.

Transfer position

IMPULSE low care beds have a transfer position that provides an intermediate height to move in and out of bed at sitting height. Combined with the mobilisation position of the side­rail­ options GS and VGS, occupants can get into and out of bed comfortably, safely and independently.

Comfort sitting position

The button mechanism on the hand controller moves the bed into a comfortable, upright sitting position for the occupant. The comfort sitting position has a positive effect on vital functions, facilitates orientation for residents/patients and allows them to communicate with each other.

Trendelenburg position

The Trendelenburg position can be a good measure to assist with stabilising occupants with circulatory problems. The motorised adjustment in the head-lowering device enables quick action in an emergency.

Figures showing edition 400 LR

A fresh and homely approach to fall prevention

Malsch sets new standards for care with its ultra-low bed IMPULSE edition 500.

At only 15 cm, the reclining surface is only as high as a ballpoint pen in the lowest position. The best news is that the new all-rounder from the Malsch care bed family also has all the proven functions of premium care beds.

Lowest position of just 15 cm

Functionality without compromising on appearance. At this low height position there is no need for a bed rail, even for those at risk of falling. Reduce your staffing requirements and give residents greater self-determination and safety.

Transfer position

An intermediate stop at optimum sitting height enables bed occupants to comfortably get into and out of bed over the edge of the mattress. An optional mobilisation aid provides a stable grab handle for support when getting into and out of bed. The sophisticated layout of the reclining surface and mobility aid facilitates the transition to a position for getting out of bed.

Comfort sitting position

Using the button mechanism on the hand controller, the occupants can move into a comfortable, upright sitting position. The comfort sitting position has a positive effect on vital functions, facilitates orientation for and allows them to communicate with each other.

Trendelenburg position

The Trendelenburg position can be a good measure to assist with stabilising occupants with circulatory problems. The motorised adjustment in the head-lowering device enables quick action in an emergency.

Figures showing edition 500

Access position

The access position provides the optimal height for getting in and out of bed from a seated position. Combined with the mobilisation position of the side­rail­ options GS and VGS, occupants can get into and out of bed comfortably, safely and independently.

Working height

Ergonomic, back-friendly working is important for maintaining the health of care staff. The working height makes it possible to care for the bed occupants in an upright position.

Comfort sitting position

The button mechanism on the hand controller moves the bed into a comfortable, upright sitting position for the occupant. The comfort sitting position has a positive effect on vital functions, facilitates orientation for residents/patients and allows them to communicate with each other.

 

Trendelenburg position

The Trendelenburg position can be a good measure to assist with stabilising occupants with circulatory problems. The motorised adjustment in the head-lowering device enables quick action in an emergency.

Figures showing edition XL

Low position for fall prevention

The IMPULSE care bed features a low position for fall prevention. Effective fall prevention is achieved when the reclining surface is at a height of just 27 cm.

Working height

Ergonomic, back-friendly working is important for maintaining the health of care staff. The working height makes it possible to care for the bed occupants in an upright position.

Fowler’s sitting position

The button mechanism on the hand controller moves the reclining surface into a comfortable sitting position for the occupant. Fowler’s sitting position has a positive effect on vital functions, facilitates orientation for residents/patients and allows them to communicate with each other.

Figures showing edition 420

Low position for fall prevention

The IMPULSE care bed features a low position for fall prevention. Effective fall prevention is achieved when the reclining surface is at a height of just 28 cm.

Working height

Ergonomic, back-friendly working is important for maintaining the health of care staff. The working height makes it possible to care for the bed occupants in an upright position.

Fowler’s sitting position

The button mechanism on the hand controller moves the reclining surface into a comfortable sitting position for the occupant. Fowler’s sitting position has a positive effect on vital functions, facilitates orientation for residents/patients and allows them to communicate with each other.

Figures showing edition 420 LR

One care bed – countless configurations

Flexibility in the choice of reclining surface

The 4-part reclining surfaces with mattress compensation by offer excellent­ ergonomics and a high degree of comfort. Retracting the back rest during the adjustment process helps to relieve pressure on the buttocks area.

The ABS reclining surface offers ease of handling and quick cleaning as result of its removable plastic surfaces:

  • Rapid, easy cleaning and disinfection
  • Easy to remove/replace
  • Good ventilation for healthy sleep

The flexible spring elements of the comfort reclining surface adapt optimally to the body and are suitable for preventing pressure sores.

  • Additional mattress support when adjusting body
  • Even weight distribution across the entire reclining surface
  • Relief for neck and back muscles
  • Active ventilation for healthy sleep

In the basic version, the metal mesh reclining surface has excellent ventilation properties and enables optimum moisture transfer.

ABS reclining surface

The vertical side rail system

The vertically retractable, split side rail system (VGS) with four height positions can be used flexibly to suit a wide range of application scenarios. The advantages of the telescopic version lie primarily in its compact design, which does not require any space at the side, as well as the extended fall prevention position.

The high-quality anodised aluminium version with a solid wood handrail provides maximum stability and emphasises the high product quality of the IMPULSE.

In addition to securing the bed’s occupant, the safety elements at the head end can be used as a mobilisation aid (1). The secure grab handle provides assistance with getting up or going to bed. The sophisticated layout of the sleeping surface and side rails makes it easier to move into a position to get out of bed.

The standby position (2) of the side rails allows the occupant to sit comfortably on the edge of the bed and enables easy access by lowering all side rail elements.

The extended fall prevention (3) position with tangible boundaries around the sleeping surface counteracts unconscious rolling out and assists care staff during the transfer.

When telescoped to its maximum height, it is possible to completely secure (4) the bed occupant.

Fig. 2

Fig. 3

Fig. 4

Other side rail systems for Malsch care beds

Vertical side rail system with one-handed operation

The vertically retractable side rail system is optionally available with the same functionality as a one-handed operation version.

Swivelling side rail system

For technical reasons, the swivel-mounted version of the split-side rail offers three height positions with the same material properties and stability.

Full-length side rail

As an inexpensive alternative to the split side rails, the IMPULSE is also available with full-length side rails.

Adjusted to new bed occupant –
the integrated bed extension

Changing residents require flexible solutions. The integrated bed extension enables optimal lying comfort, even for tall people.

The reclining surface can be extended in a matter of seconds without tools using a quick-release mechanism. All bed functions remain fully usable in the extended state.

The system can be telescoped in two stages
(by 10 or 20 cm) and does not require additional protectors. For an extension of 20 cm, we recommend using an optional mattress insert.

Hand controller with intuitive operating functions

To conveniently control the bed functions electronically, the IMPULSE care bed has an easy-to-understand, hand controller with intuitive symbols and individual locking functions. The illuminated keys with high-contrast symbols enable the user to find the right operating functions, even in the dark.

Care staff can lock individual functions or the entire hand controller using a key switch on the reverse.

To position the hand controller so that the occupant can reach it, we recommend the optional hand control holder with flexible swan neck. The standard scope of delivery includes a device to hang the hand controller on the side rails or side bar.

Absolute design freedom

Decide for yourself which design and finish you would like for your IMPULSE headboards and footboards.

Head/footboard designs

Design high / open
V450.D1

Design high / closed
V450.D2

Design low / closed
V450.D3

Design high / open
V470.D1

Design high / closed
V470.D2

Design low / closed
V470.D3

Design high / open
V480.D1

Design high / closed
V480.D2

Design low / closed
V480.D3

Design high / open
V490.D1

Design high / closed
V490.D2

Design low / closed
V490.D3

Design high / open
V500.D1

Design low / open
V500.D4

Design high / closed
V408.D2

Design low / closed
V408.D3

Various finishes

Steamed Beech
R24034

Altmuehl Beech
R24006

Sycamore
R27024

Milano Oak
R20095

Sonoma Oak light
R20128

Truffle Sonoma Oak
R20031

Havanna Cherry
R42006

Standard Walnut
R30001

Dark Springfield Oak
R20234


Customise your care bed and request a quotation now!